Aerpro Vehicle Bluetooth Immobiliser Kit AIMBT

The Aerpro AIMBT Bluetooth Vehicle Immobiliser is a hardwired, black-wired anti-theft immobiliser that arms and disarms automatically via a paired BT key-tag or smartphone, so there is nothing to insert, press or remember on the way in or out of the vehicle. Day-to-day security is handled entirely by proximity: the immobiliser arms the moment the key-tag or phone moves out of range, and disarms itself again the moment it comes back within range.

Installation is via a single immobilisation point, most commonly the ignition circuit. The included relay is rated to a nominal 10A and a maximum 20A load, giving flexibility to use alternative connection points if preferred such as the fuel pump or push-to-start (PTS) wire. All vehicle-side wiring is finished in black rather than colour-coded, making it difficult to identify which wire performs which function, and connects directly into the module with no plugs to unclip, so the immobiliser cannot simply be disconnected to bypass it.

Proximity detection is adjustable across 5 levels from approximately 3 to 15 metres, tuned to suit the vehicle and how it is typically parked. If the key-tag is lost or its battery goes flat, and the paired smartphone is not in range, a valet and emergency override procedure allows the vehicle to be started manually without needing a paired key-tag or phone on hand. Power-off memory retains the armed or disarmed status even if the vehicle battery is disconnected, so a flat battery or battery swap will not reset the system's security state.

For vehicle owners after reliable theft protection that works automatically in the background, the Aerpro AIMBT Bluetooth Vehicle Immobiliser is a dependable addition to any 12V DC vehicle including cars, utes, 4WDs, vans and most light commercial vehicles.

WARNING - KEEP OUT OF REACH OF CHILDREN
The key-tag contains a lithium coin battery, which is hazardous whether new or used. Can cause severe or fatal injury within 2 hours if swallowed or placed in any part of the body. Seek medical attention immediately. Keep batteries out of reach of children.

Specifications

• Connectivity
  • Working Frequency: 2.4GHz Bluetooth Low Energy (BLE)
  • Key-Tag Coding: Dialog
  • Proximity Range: 5 adjustable levels, approximately 3 to 15 metres
• Power
  • Main Unit Working Voltage: 12V DC ±3V
  • Main Unit Working Current: <21mA
  • Main Unit Standby Current: 10mA
  • Key-Tag Battery: CR2032
  • Key-Tag Standby Current: <2µA
• Installation
  • Immobiliser Type: Single-point immobiliser
  • Recommended Immobilisation Point: Ignition circuit (fuel pump or push-to-start (PTS) wire as an alternative)
  • Relay Rating: Nominal 10A, maximum 20A
  • Wiring: Black, non-colour-coded, hardwired directly into the module with no plug connector
• Vehicle Compatibility
  • Application: 12V DC, suits cars, utes, 4WDs, vans and most light commercial vehicles
• Inclusions
  • 1 x AIMBT Immobiliser Main Unit (with integrated wiring loom that includes valet switch and buzzer)
  • 1 x BT Key-Tag (CR2032 battery pre-installed)
  • 1 x Key-Tag Hook
  • Adhesive Mounting Tape (for immobiliser module)